Shaft Encoder Repairs
Electronics Introduction
Approved Service Agents
Standards of Service
Power Supplies
Inverters
DC Drives
Instrumentation
Soft Starts
General Electronics
PLC's
Shaft Encoders
Specialist Servo Repairs
 WYKO Electronics repairs a wide range of shaft encoders. Hall effect with brushless tacho, incremental, absolute and commutation types.

Standard Repair Policies:
The most advanced ATE is used to pinpoint faults in logic and analogue circuitry with test pattern rates up to 10 MEG The most advanced ATE is used to pinpoint faults in logic and analogue circuitry with test pattern rates up to 10 MEG.
Encoders tested at speed to ensure there are no missing pulses Encoders tested at speed to ensure there are no missing pulses.
As Standard Replacements All low voltage high frequency electrolytic capacitors in the power supply are replaced as standard with 105C high performance low ESR types.
Computerised analogue signature analysis used on all duplicated functional channels Computerised analogue signature analysis used on all duplicated functional channels.
Unit thoroughly cleaned, all solder flux removed with solvent Unit thoroughly cleaned, all solder flux removed with solvent.
Anti static precautions to BS EN100015 Anti static precautions to BS EN100015.

Manufacturers :
British encoder, Hohner, Heindenhain, Stegmann and Renco.
WYKO Electronic Services, Tel: 0151 5254025 Fax: 0151 5254048
e-mail : electronic.services@wyko.co.uk